Roof and attic vents

Roof and attic vents

The vents and attic vents are an extremely important part of your home. Their function is to balance the airflow and ventilation in the attic to create. Without the right balance, problems can occur. The correct number of vents on the roof and attic, the life of your roof and avoid costly repairs.

The problems caused by inadequate roof and attic vents

o The air is insufficient ventilation in the attic with a shot, creating an ideal environment for mold to grow. Moldcan lead to serious health problems.
or have your air conditioner to work harder. In summer, the temperature in your attic to reach 150 degrees Fahrenheit. This forces your air conditioner work harder to cool your home. This leads to wasted energy and higher energy costs.
The hot air or for cooking, the bottom of the roof and the tiles will deform or crack, shortening his life.
o In winter, the warm, moist air from theThe heat is trapped in the attic. This will cause the snow to melt on the roof. When the outdoor temperature drops, the melt water freezes into ice and causes ice dams. Ice dams are often gravel roof leaks and damage.

Types of openings: intake and exhaust

There are two types of vents on the roof and attic vents. Air vents that lie along the soffit (the area under the overhang) are placed. They allow fresh air into the attic. Scuppers are installedIn the upper third of the roof to allow air to escape into the attic.

Suction valves

There are three types of vents used in residential roofing: Gable, static and ceiling. They each offer a different form of ventilation and is important for the functioning of your roof.

1 Gable - The openings in the wall just below the top of the gable roof is installed. Vents for heat dissipation eardrum during the summer, and prevent condensation during the winter.There are many decorative gable vents on the market, available in various shapes and colors.

2 Static - also known as blades are made of static on the roof openings covered roof. They allow air to escape from the attic. You are required to adequately ventilate the attic. They are near the top of the roof installed.

3 Ceiling - soffit vents under the roof, just near the eaves.

Exhaust Vents

There are two types of exhaust vents: static and food loversVentilation openings

1 Static Vents - These make it possible for air to escape without power. Ridge vents are a kind of static air vents. They allow air to escape, and near the top of the roof are installed. Ridge vents are the most effective types of openings.

2 Fans of power - These openings remove air from the attic. Turbine has announced openings, use the wind to move air in and out of the attic. They are installed along the roof surface. When the wind blows, the turbine wheel,that sucks air in and out of the attic.

Cordless Lighted Makeup Mirror cat peeing on furniture gopro hd camera